Call a Specialist Today! 866-981-2998

DHWS, Mobile Personal Amplifier

MPA Go M portable amplifier (For Bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 20) is a portable, rugged, closed-case solution to boost cellular signal up to 100dB gain in both planned events and emergency-response situations. Available in Yellow or Black casing.

#MMMPDH000001 (Yellow) | #MMMPDH000002 (Black)

Our Price: $1,899.00

Yellow MPA Go M
Black MPA Go M


  • Omni Directional Server Antenna
  • Omni Directional Donor Antenna
  • SMA Antenna Connector
  • 12V DC Input
  • 110-120V AC Input


The MPA GO M is a Smart Cellular Amplifier for Bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 20. It is a rugged, Closed-Case Solution / "Go-Kit" for network enhancement that improves cellular and digital-data communications. The MPA utilizes an internal smart cellular amplifier to allow its end-users to access and push & pull digital-data and cellular connectivity in fringe network coverage areas. The MPA is ideal for users in need of network enhancement due to lack of cellular signal or obstructed network coverage due to terrain or man made structures.

MPA GO M Open Right


  • Nextivity Cel-Fi GO M Signal Booster
  • Omni Directional Server Antenna
  • Omni Directional Donor Antenna
  • SMA Antenna Connector
  • 12V DC Input
  • 110-120V AC Input
  • 12-14V DC
  • AC/DC Flexible Power Cords
    • AC Power Cord
    • DC Power Cable with 12V Auto Connector
    • DC Power Cable with 2.5mm Barrel Connector
  • Cable Pouch
  • Portable, Rugged Outdoor-Ready Case

How It Works:

The MPA portable amplifier from DH Wireless Solutions is a closed-case, rugged, easy-to-use smart cellular boosting solution. It comes assembled, provisioned with all the hardware and software needed and ready for initial set up to boost cellular connectivity on the go in remote and challenging locations. The MPA is configured for industry-leading 65 dB gain in mobile mode, delivering the best voice/data wireless performance and in stationary mode, it delivers 100 dB gain—which is up 1000x greater than other solutions.

Go to the Google Play or Apple App Store and download the Cel-Fi Wave app to your Android or iOS smart device and connect to your MPA with Bluetooth.

To activate your MPA portable amplifier:

  • Connect the magnetic mount donor antenna to the SMA female jack on the side of the MPA case
  • Position the antenna in a location for best reception of the available cellular signal
  • Plug in the MPA to your AC or DC power source
  • Press the Power Button near the handle; button will illuminate indicating the unit is active
  • The MPA will boot up and self-calibrate automatically blinking green in the LED status window
  • The status LED will turn solid green once the system is fully booted and is boosting

In just minutes, your MPA will be ready to boost specific carrier bands to improve signal anywhere cellular connectivity is available


MPA Go M Technical Specifications



Material: Injected molded polypropylene based NK-7 resin enhanced with several performance additives.

Performance: Weather-worthy, impact resistant, and light weight—similar to IP65 rating when case and ports are closed. Automatic pressure release system valve. Micro vent for air while preventing water from entering.

Weight: Approx. 11.0 lbs.

Dimensions: 15.8˝ x 12.1˝ x 6.8˝

Security: Nylon PowerClaw latches, TSA combination padlock capable.


Operating Temperature: 0°C to 65°C (32°F to 149°F), Convection Cooling, Relative Humidity: 0% to 95%


120/110v AC external port for operating; NEMA 5-15P (3-prong) 3 ft. cord included.

12v DC external port for operating; 2 SAE cords included (12v auto and 2.5mm barrel connector).



Cel-Fi WAVE app (free download) available in your Android and iOS app store.

Status, Settings, Reporting, Diagnostics, Alarms and Notifications, Software Updates, Carrier Switching.



Supports two bands simultaneously from a single carrier (3G/4G/LTE) up to 100dB gain per band with no interference to other cellular devices or WiFi. Covers up to 15,000 sq feet per MPA.


SMA Connectors: (Server & mag-mount donor) | Impedance: 50 Ohm


Multiple configuration profiles supported. Depending on the configuration of the MPA, it can support Bands 2,4,5,12,13 | 791-2690 MHz or Bands 1,3,5,7,8,20 | 699-2180 MHz


Yes (Checked Bag and Carry-On)


Download the MPA GO M (.PDF)

Digital Highway Products
MPA Go Series
MPA GO M (Yellow)
Yellow MPA Go M
Our Price: $1,899.00
MPA GO M (Black)
Black MPA Go M
Our Price: $1,899.00
Protective carrying case for MPA
Our Price: $150.00